Add to Favorites

3-5mm Desiccant Beads Molecular Sieve 4a for Moisture Removal in Stock

Payment
Origin

China Mainland
Minimum Order

1
Packing

Pieces
Contact Now Start Order

Description

Product Detail

3-5mm desiccant beads molecular sieve 4A for moisture removal in stock Product Description.

1.Specification.

Model	4A
Color	Light gray
Nominal pore diameter	4 angstroms
Shape	Sphere		Pellet
Diameter (mm)	1.7-2.5 (8*12 mesh)	3.0-5.0 (4*8 mesh)	1.6 (1/16 inch)	3.2 (1/8 inch)
Size ratio up to grade (%)	=98	=98	=96	=96
Bulk density (g/ml)	=0.70	=0.70	=0.68	=0.68
Wear ratio (%)	=0.20	=0.20	=0.40	=0.40
Crushing strength (N)	=35/piece	=85/piece	=30/piece	=70/piece
Static H2O adsorption (%)	=21.5	=21.5	=21.5	=21.5
Static methanol adsorption(%)	=15	=15	=15	=15
Water content (%)	=1.5	=1.5	=1.5	=1.5
Typical Chemical Formula	Na2O . Al2O3 . 2SiO2 . 4.5 H2O (SiO2 : Al2O3 ˜2)
Warranty:	By National Standard HGT 2524-2010 Offer lifetime consultation on problems occurred

2.Typical Application:

- Used in instruments/devices

- Used in air compressors

- Used in air dyer;

3. Regeneration:

Chemxin molecular sieve Type 4A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 4A molecular sieve, a temperature of 250-280°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process

4. Size:
4A - Zeolite are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.

5. Attention:
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

Package & Shipment.